SOLAR GENERATOR
500 W to 7 kW Portable Solar Generator with AC, DC and USB Outputs
Factory Direct SupplyOEM & ODM AvailableExport Documentation SupportSKU: 500-W
Portable power for field work and events Available in 500 W / 1000 W / 2000 W / 3000 W / 5000 W / 6000 W / 7000 W, lead-acid or gel battery support, single phase.
- 500 W / 1000 W / 2000 W / 3000 W / 5000 W / 6000 W / 7000 W rated capacity
- Lead-acid or gel battery support
- Single phase configuration
- OEM, ODM and private label
SKU: 500-WCategory: Solar Generator
Description
2x AC sockets, 4x 12 V DC terminals and 2x USB, 3x peak power
Product highlights
- 500 W / 1000 W / 2000 W / 3000 W / 5000 W / 6000 W / 7000 W rated capacity
- Lead-acid or gel battery support
- Single phase configuration
- OEM, ODM and private label
- Factory direct supply
- Export documentation support
Technical specifications
| Rated power | 500 W / 1000 W / 2000 W / 3000 W / 5000 W / 6000 W / 7000 W |
|---|---|
| Input voltage range | On request |
| MPPT channels | — |
| Battery type | Lead-acid or gel |
| Max charge current | On request |
| Efficiency | On request |
| Communication | On request |
| Protection rating | On request |
| Dimensions | On request |
| Weight | On request |
Typical applications
- Portable power for field work and events
- Backup supply during planned grid maintenance
- Off-grid sites needing one self-contained enclosure
- Parallel units for higher load demand
Related products
Description
The LK-A2 is a portable solar generator rather than a fixed inverter. Seven models run from 500 W to 7 kW, each with two AC sockets, four 12 V DC terminals and two USB ports on the front panel, plus a 3x peak rating for motor starting.
Battery and mains are fully isolated, and the built-in automatic charger doubles as a mains changeover switch. Working mode is set to mains priority or PV priority, and AC charging current is selectable from 0 to 30 A. The 500 W and 1 kW models use PWM charging; the rest use MPPT.
Product highlights
- Seven models from 500 W to 7 kW, portable format
- 2x AC socket, 4x 12 V DC terminal and 2x USB outputs
- 3x peak power for inductive and motor loads
- Complete isolation between battery and mains
- Built-in automatic AC charger and mains changeover switch
- Selectable AC charging current from 0 to 30 A
Technical specifications
| Rated power | 500 W / 1000 W / 2000 W / 3000 W / 5000 W / 6000 W / 7000 W |
|---|---|
| Battery type | Lead-acid or gel |
| Phase | Single phase |
| Peak power (20 ms) | 1500 VA / 3 kVA / 6 kVA / 9 kVA / 15 kVA / 18 kVA / 21 kVA |
| Charge controller | PWM (500 W, 1 kW) / MPPT (2 kW and above) |
| Max PV open-circuit voltage | 50 VDC / 150 VDC |
| PV array maximum power | 280 W / 560 W / 1680 W / 3360 W |
| MPPT tracking range | 15-44 VDC / 30-120 VDC / 60-120 VDC |
| PV charging current | 20 A / 40 A / 60 A |
| Battery voltage | 12 VDC / 24 VDC / 48 VDC |
| Battery capacity | 1x 12 V 50 Ah to 4x 12 V 200 Ah |
| AC input voltage | 110 / 120 / 220 / 230 / 240 VAC |
| AC input frequency | 45-55 Hz or 55-65 Hz |
| AC output voltage | 110 / 120 / 220 / 230 / 240 VAC, 50 Hz ±1% or 60 Hz ±1% |
| Output waveform | Pure sine wave |
| Conversion efficiency | 85% |
| Working mode | Mains priority / PV priority |
| Display | LCD + LED |
| Communication | RS485, mobile app with WiFi or GPRS (not available on 500 W and 1 kW) |
| Protection rating | IP20 |
| Operating temperature | −15 to 40 °C |
| Dimensions (LxWxH) | 358x192x390 mm to 610x535x960 mm, by model |
Typical applications
- Camping, outdoor events and mobile stalls
- Field clinics and vaccination cold chain
- Small shop and market stall backup
- Emergency lighting and communication power
- Remote construction and survey camps